Part-Winding Start Pump Control Panels

PRODUCT DESCRIPTION
STANDARD FEATURES

PRODUCT DESCRIPTION

Product Description

A Part-Winding pump control panel is a “combination starter” which combines a part-winding magnetic starter along with a fusible switch or a circuit breaker.

Our pump panels offer protection against short circuit faults, protection against mo-tor overload faults, and means of discon-necting the motor and the controller from the power supply lines.

Part-Winding motor starters (or two-step starters) provide economical reduced cur-rent starting in applications where the supplied power restricts the increments of current drawn from the lines, and a simple method of accelerating loads with low starting torque.

These controllers require a motor suitable for Part-Winding Starting.

STANDARD FEATURES

Standard Features

Fully welded heavy-duty steel enclo-sure with gasketed hinged door and provisions for padlocking. Gray powder-coating finish suitable for use in harsh environments

Type 3R rating suitable for use out-doors. Rain and sleet resistant. Top and bottom brackets for wall or pole mounting

Choice of disconnect style: Fusible Switch, or Circuit Breaker

Fusible Disconnect Switches include factory-installed J-Class time-delay du-al-element current-limiting power fuses

Through the door disconnect operator with provisions for padlocking in the off position

Part-Winding Magnetic Motor Starter with choice of coil voltage

(2) Solid State Class 10 Overload Re-lays with adjustable trip point and in-herent protection against loss of phase

Fast-Acting Supplementary Fuses for protection of internal and external con-trol circuit wiring against damage due to short circuits and ground faults

Hand-Off-Auto Selector Switch

Terminal Block for ease of wiring to and from a remote control device

UL 508 Listed Industrial Controls

Suitable for use as Service Equipment